An electric heater is easy to connect to the existing electrical power-mains and provides full power round the clock. The water from the swimming pool’s circulation flows through the heater and is heated by the heating element. The heaters are compact and can be installed in all types of pool or spa. Pahlén electric heaters have at capacity range from 1,5 to 60kW. The smaller heaters within the range 1 to 3kW suit smaller pools and spas. Heaters in the range 3 to 18kw is for larger in ground and above ground pool while the lager heaters from 18 to 60kW is made for public facilities.
Pahlén manufactures electric heaters for spas, swimming pools and large adventure pools.
The materials used are AISI 316L acid-proof stainless steel, titanium and thermoplastic. All the electric heaters are designed for continuous flow with the lowest possible pressure drop. All Pahlén pool heaters are supplied with a thermostat as well as an overheating cutout. For extra security, a flow switch or pressure switch protects the heating element from damage if the flow to the heater is insufficient.
Triple safety!
Aqua HL, Aqua HS and Maxi Heat are all equipped with dual contactors as an additional safety if one contactor should fail.
The flow switch provides an additional safety if the water flow is too low.
The overheating limit control provides an additional safety against overheating.
All these together give a triple safety that protects the product and the heating elements.
Electric heater compact.
With heating outputs between 3 and 18 kW. They are supplied with a thermostat as well as an overheating cutout.
For extra security, a flow switch or pressure switch protects the heating element from damage if the flow to the heater is insufficient. These electric heaters are available in both titanium/Nic-Tech and AISI 316L acid-proof stainless steel.
Spa heater is a small, compact heater for spa pools and small swimming pools. It is available with capacities from 1.5 to 3 kW.
The heater is made of thermoplastic and has a heating element made of Incoloy 825. Adjustable thermostat, overheating cutout and flow switch are standard.
Air heater is for instance used for air massage in spa pools. The incoming air is heated and mixed with the water.
The heater has a power output of 1.5 kW and is made of acid-proof stainless steel AISI 316L. Supplied as standard with a thermostat and overheating cutout.
Features digital control. The required pool temperature is easy to set and shows clearly in the LED display. In addition to the built-in overheating cutout and flow switch the heater has built-in contactors for easier installation.
Slip connections for bonding of Ø 50 mm pipes. Rated output 3-15 kW. Made of thermoplastic with heating element made of Incoloy 825 or titanium.
With digital control is an effective heater for swimming pools. The required pool temperature is easy to set and is clearly shown in the LED display.
The heater is equipped with a thermostat, overheating cutout and flow switch. Maxi Heat is also equipped with automatic fuses for extra protection. Outputs from 18 to 72 kW.
